Fibreglass Anti-slip Strips 50mm x 3620mm

$50.60

Clear
SKU: N/A Category:

Description

Available in 50mm & 100mm widths – 3620mm lengths or custom cut to required sizes. All colours available including Safety yellow, black, white, red & grey Introduction 2.5mm thick Fibreglass stripes are manufactured to provide a tough, flexible & abrasion slip resistant finish for internal & external use. The fibreglass base is constructed with a #36 grade silicon carbide anti-slip granule. 2 coats of a special 2-part Polyurethane coating is then applied over to achieve a hard wearing, UV & chemical resistant anti-slip surface. Principal Characteristics  Tough, flexible and abrasion resistant  Unlimited re-coat  Excellent resistance to atmospheric exposure  Excellent colour and gloss retention  Resistant to splash of mineral and vegetable oils, white sprit, paraffins and aliphatic petroleum products Fixing On suitable surfaces the anti-slip strip can be fixed using an adhesive or by drilling and screwing. We recommend if fixing by drilling & screwing to place a bead of adhesive under the anti-slip strip.  Design for access and mobility STAIRWAYS & STEPS: To comply to the Building Code each step shall have a strip not less than 50mm and not more than 75mm deep across the full width of the path of travel. The strip may be set back a maximum of 15mm from the front of the step. The strip shall have a minimum luminance contrast of 30% to the background. TEST RESULTS: According to Table 2 AS/NZS 4586:2004 Classification of surface materials the coating with grit finish achieves a classification of a P5 which is equivalent to a very low contribution to the risk of slipping when wet. When tested the product reached a mean BPN>71 and has a slip resistant classification of P5

Reviews

There are no reviews yet.

Be the first to review “Fibreglass Anti-slip Strips 50mm x 3620mm”

Your email address will not be published.