Introduction FL71 Safety Stair Nosing is specially designed for installation over new and existing steps and stairways. Quality made in a clear anodised finish, this very attractive profile together with a 50mm fine line serrated aluminium insert provides slip resistance in both wet & dry conditions. Insert 3mm x 50mm wide anti-slip strip made up of 20 x fine serrated lines available in clear or black anodised to meet the luminous contrast requirements. Compliance The FL71 Stair Nosing being 37mm x 71mm meets the minimum depth requirements of the National Construction Code 3.2 and the Australian/New Zealand Standards AS1428 â€” 2009 Design for access and mobility, Part 1. Ultimate in Anti-Slip Safety The insert exceeds the requirements of the Australian/New Zealand Standards for anti-slip AS4586:2013 Appendix â€˜Aâ€™, Slip resistance classification of new pedestrian surface materials and the National Construction Code. Inserts have a slip resistance classification of R12 – P5 Test report available upon request. Material ï‚· 10 um anodised aluminium 3mm thickness weighting 0.694Kg/m ï‚· Countersunk holes are standard and provided at 280mm centres. ï‚· A strong hold fixing tape is also provided to secure insert. Size ï‚· Outside dimensions 37mm x 71mm Profile ï‚· Square turn down edge with bevelled serrated back edge Length ï‚· Available in 3620mm lengths or custom cut to required sizes Fixing ï‚· Floorsafe Australia Pty Ltd recommends using a combination of adhesive and screw fixings.