Introduction FL75 Safety Stair Nosing is specially designed for installation over new and existing steps and stairways. Quality made in a clear anodised finish, this very attractive profile together with a 50mm fine line serrated aluminium insert provides slip resistance in both wet & dry conditions. Insert 3mm x 50mm wide anti-slip strip made up of 20 x fine serrated lines available in clear or black anodised to meet the luminous contrast requirements. Compliance The FL75 Stair Nosing being 37mm x 75mm meets the minimum depth requirements of the National Construction Code 3.2 and the Australian/New Zealand Standards AS1428 â€” 2009 Design for access and mobility, Part 1. Ultimate in Anti-Slip Safety The insert exceeds the requirements of the Australian/New Zealand Standards for anti-slip AS4586:2013 Appendix â€˜Aâ€™, Slip resistance classification of new pedestrian surface materials and the National Construction Code. Inserts have a slip resistance classification of R12 – P5 Test report available upon request. Material ï‚· 10 um anodised aluminium 3mm thickness weighting 0.694Kg/m ï‚· Countersunk holes are standard and provided at 280mm centres. ï‚· A strong hold fixing tape is also provided to secure insert. Size ï‚· Outside dimensions 37mm x 75mm Profile ï‚· Bull-nosed rounded front turn down with bevelled serrated back edge Length ï‚· Available in 3620mm lengths or custom cut to required sizes Fixing ï‚· Floorsafe Australia Pty Ltd recommends using a combination of adhesive and screw fixings.