Polish Grip – Polished Marble & Granite Anti-Slip Penetrating Sealer




Polish Grip is a professional-grade penetrating sealer designed to provide anti-slip protection on unsealed natural stone, polished porcelain tile, polished marble, polished granite, concrete and other surfaces. This easy-to-use treatment can be applied with a clean white towel, microfiber towel, paint roller/brush or Polish Grip Applicator.

Once applied, it forms an invisible barrier that creates surface tension, increasing traction and improving resistance to spills and stains. The lustrous natural shine of your highly polished surface and grout remains unchanged. Polish Grip provides a more durable surface with effective anti-slip protection. For use on interior and exterior surfaces including grout.

Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards.

0.54 Wet DCOF – ANSI B101.3*
0.59 Wet DCOF – ANSI A137.1 / A326.3*
0.69 Wet DCOF – ANSI B101.1*

*Example on Polished Honed Terrazzo

Bonus: FREE included with Gallon purchase, a $15 value!


  • One easy application with this penetrating sealer can increase traction up to two years
  • Available in pint and gallon
  • Ideal for any polished surface
  • Keeps your surface protected for years to come
  • Coverage:  One gallon can cover up to 2,000 sq. ft.


Pint Gallon
Coverage per size 300 2,400
Cost per Sq Ft (Appx.) $0.21 $0.10
Applicators Included 1
Volume  473 mL 3.78 L


Directions for Preparation, Application and Use

Read entire product label, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) before using. Polish Grip anti-slip sealer should not be diluted or thinned in any way.

Surface Preparation:

• Clean surface thoroughly with a pH neutral cleaner.
• Surface must be clean and dry before application.
• Do not apply if it has rained in the last few days or if humidity level is high
• Protect exposed surfaces including wood, carpet, metal and landscaping.

New Installation Application Instructions:

Step 1: Sample Testing: Due to variations in substrates, performing a sample test is recommended to ensure maximum performance and suitability for the intended use. Test product in an inconspicuous area before full application. Minimal shading may occur temporarily until fully cured and first cleaning.
Step 2: Do not thin or dilute. Apply evenly to surface until damp using a clean white towel or microfiber towel. Leave on surface for 3 to 5 minutes for maximum penetration.
Step 3: Remove all excess product with a clean white towel, microfiber towel or carpet bonnet before product dries.
Step 4: Any excess product residue that dries on the surface can be removed by re-applying a small amount of Polish Grip to the area and immediately wiping off excess while wet.
Step 5: If a second application is desired, allow at least 1 hour before applying.
Step 6: Polish Grip will fully cure in 24-72 hours, depending upon conditions.


Clean regularly using a pH-neutral leaner. For best results, re-apply annually to renew slip-resistance.


There are no reviews yet.

Be the first to review “Polish Grip – Polished Marble & Granite Anti-Slip Penetrating Sealer”

Your email address will not be published.