Quick-Fix self-adhesive PVC coloured tactiles T09SA

$0.66

Clear

Description

Quick-Fix self-adhesive Plastic Tactile Indicator Product Code: T09SA Technical Data Sheet Technical Data ï‚· Code: T09SA ï‚· Material: PVC Polyurethane Blend with 3M selfadhesive bonding compound o Density:1390 Kg/m³ o Heat Transfer Coefficient: 0.16W/(m.K) o Melting Point: 250°C o Effective Head of Combustion: 17.95 MJ/KG o Tensile Strength: 50-80MPa o Elongation at break: 20-40% o Notch Test: 2-5 Kj/m² o Young’s Modulus: 2900-3300 Mpa ï‚· Dimensions: Outer Diameter 35mm x top diameter 25mm x Height 4.5mm ï‚· Slip Rating: P5 (test report available on request) Design for access and mobility – Design for access and mobility: General requirements for access – New building works ï‚· Australian/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators ï‚· Australian/New Zealand Standard 4586 – 2013 – Slip resistance classification of new pedestrian surface materials Installation Instructions Make sure you remove any debris & dust and make sure the surface is completely dry. Suitable Surfaces: Surfaces must be FLAT and SMOOTH e.g. tiles, concrete, timber, bluestone, stone, bitumen, metal etc. 1. Use masking tape to mark the area where the tactiles have to be installed. 2. Place the template into position and tape corners to hold the template firm. 3. Remove Release Paper from the back of the tactile and simply drop the tactile into template 4. Using a rubber hammer tap lightly to make sure full adhesion occurs 5. Once the template is complete with the tactiles lift and remove it. 6. To continue place the first 3 circle rows on the template over the last 3 rows of completed tactiles. This will make sure the line is running straight. Continue as item 3. Luminance Contrast The Building Code of Australian/New Zealand and the AS/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guide lines are as follows: ï‚· Integrated tactile indicators – not less than 30% across the entire area ï‚· Discrete (individual) tactile indicators – not less than 45% ï‚· Where Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60% Test – AS.NZS 1428.4.1 2009 Appendix E (pg 70-77)

Reviews

There are no reviews yet.

Be the first to review “Quick-Fix self-adhesive PVC coloured tactiles T09SA”

Your email address will not be published.