T01 316 Stainless Steel Tactile Stud



Technical Data  Code: T01  Type: Warning tactile  Material: Solid 316 Stainless Steel  Dimensions: Outer Diameter 35mm x Height 4.5mm  Flat glue down tactile  Slip Rating: P5 (test report available on request) Features  Produced by CNC machine with milling finish  10 Year warranty against rust & corrosion only Installation Instructions Make sure you remove any debris & dust and make sure the surface is completely dry. A light sand papering applied to the back of the Tactile will also assist adhesion. 1. Use masking tape to mark the area where the tactiles have to be installed. 2. Place the template into position and tape corners to hold the template firm. 3. Place a small amount (Tin Tac size ) of the adhesive into the centre of each circle. 4. Place the Tactile into position and turn the stud a half a turn to allow the glue to spread under. NOTE: Too much adhesive will spread outside of the Tactile and show. 5. Once the template is complete with the tactiles very carefully lift and remove it. 6. To continue place the first 3 circle rows on the template over the last 3 rows of completed tactiles. This will make sure the line is running straight. Continue as item 4.


There are no reviews yet.

Be the first to review “T01 316 Stainless Steel Tactile Stud”

Your email address will not be published.